 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| E Series Forum covers questions and discussions regarding Ford E-150, Ford E-250, Ford E-350, and Ford E-450. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
04-20-2011, 04:06 PM
|
#1 | |
|
AF Newbie
Join Date: May 2008
Location: Altamont, Tennessee
Posts: 47
Thanks: 1
Thanked 0 Times in 0 Posts
|
p0340 code
I have a Ford E-150 4.2l autotrans. I have the P0340 code coming up. The code reads "Cam Position Sensor A Bank 1 Ckt Malfunction". This code seems to be spcifet to bank 1 as code P0345 reads the same as P0340 but is bank 2. I have a misfire that ocures during load on the engine. I have replaced the cam shalft sensor and it's shalft. I have also replaced plugs and wires. and the crank shalft sensor also. What I am woundering is could this be the coil pack. I is not as bad when cold but when it gets hot the trouble starts up. Anybody got a clue as to why this is bank 1 only
Thanks Leonard |
|
|
|
|
04-24-2011, 10:14 AM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: May 2008
Location: Altamont, Tennessee
Posts: 47
Thanks: 1
Thanked 0 Times in 0 Posts
|
Re: p0340 code
khung88876 Thanks your insight as to why bank1 was being effeced and not bank2 was right on. I replaced the coil and now it's running fine. Autozone was not able o test it but that was alright. I should have went with my gut in the frist place.
Thanks, Leonard |
|
|
|
|
| |||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
| Tags |
| 4.2 , e150 , misfire , p0340 |
 |
| Thread Tools | |
|
|
