Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
07-10-2009, 09:49 AM | #16 | |
AF Newbie
Join Date: May 2009
Location: North Vancouver
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1988 beretta 2.8L
MrAnon, good timing! I was hoping to update in the next day or two.
Fuel pressure is to spec's at the injector rail. Spark on all cylinders is good when cranking immediately after stall. The check engine light came on at stall but then it and the cooling fan would cycle on and off with the key on but not cranking. No codes were captured until a Code 14 after changing the Coolant Temp. Sensor as posted above. Finally bit the bullet and changed the ECM. So far, with limited testing, the vehicle has run up to 20 minutes without stalling and can be turned off and restarted at any point during that time. The cooling fan has yet to kick in. From what I have read the temperature has to be pretty high to trigger the fan so, for now, problem fixed. |
|
09-15-2009, 10:35 PM | #17 | |
AF Regular
|
Re: 1988 beretta 2.8L
Glad you got it fixed, how's she doing right now?...
__________________
Removed by Moderator |
|
10-13-2009, 11:19 AM | #18 | |
AF Newbie
Join Date: May 2009
Location: North Vancouver
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1988 beretta 2.8L
loosenut74, replaced the ECM with a rebuilt one in July and 3 months later everything is still running great. Thanks to all for the suggestions!
Hope timhunt24 got up and running. |
|
12-15-2009, 12:35 AM | #19 | |
AF Regular
|
Re: 1988 beretta 2.8L
glad to hear she still doing good !
__________________
Removed by Moderator Last edited by '97ventureowner; 12-15-2009 at 08:26 AM. |
|
02-05-2012, 07:41 AM | #20 | |
AF Newbie
Join Date: Sep 2010
Location: New York, New York
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1988 beretta 2.8L
I have a 1988 chevrolet beretta that i will be parting out
Its the automatic tranny withthe 2.8 in New yORK iM PRICING IT AT 350 LOWER THAN THE PRICEOF SCRAP OR EMAIL ME FOR PARTS FROM IT FOR A LOT LESS AT unbelievableny@aol.com |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|