Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-12-2012, 05:49 PM | #1 | |
AF Newbie
Join Date: Aug 2012
Location: Olympia, Washington
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
95 neon r&r stering column, Broken locking ignition
I have a loud clunk in my steering column. I raised the car and had someone turn the steering wheel back and forth, while I was under the car listening. I located the noise to the steering column. I then looked in my manual. Everything would be fine, but someone has already been in there causing mischief. The steering doesn't lock anymore and when I took the airbag module off the steering wheel, the airbag module electrical connector is gone. The horn is connected but doesn't work. This tells us someone atempted a repair, and left it wrong. So, my question is how do I continue to R&R the steering column without the ignition locking.
|
|
08-12-2012, 05:51 PM | #2 | |
AF Newbie
Thread starter
Join Date: Aug 2012
Location: Olympia, Washington
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 95 neon r&r stering column, Broken locking ignition
please help
|
|
08-13-2012, 07:52 AM | #3 | |
Tuning Neons since '97
|
Re: 95 neon r&r stering column, Broken locking ignition
Pull the steering wheel off and have a look at your clockspring. It probably needs to be replaced.
__________________
2003 Dodge SRT-4 |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|