 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
08-01-2022, 02:36 AM
|
#1 | |
|
AF Regular
Join Date: Feb 2010
Location: Rastatt
Posts: 151
Thanks: 0
Thanked 0 Times in 0 Posts
|
Video: Replacing the valve stem seals on an installed engine in an Audi GT 5S
Hi,
The video shows how to change the valve stem seals without removing the cylinder head. When the cylinder head is installed, no mechanical collet chuck can be used for compressing the valve springs because the underside of the valves is not accessible. The valves will be held in position by compressed air in the cylinder, while the spring is clamped from above with a special pressing tool. In principle, this procedure can be applied on all engines with an overhead camshaft. The video shows the procedure on an Audi GT 5S with 5-cylinder engine. https://www.youtube.com/watch?v=MNQ25L5PqAE The video has a German soundtrack, but English subtitles are available on YouTube. Enjoy it, Jürgen |
|
|
|
|
|
POST REPLY TO THIS THREAD |
| Tags |
| seal , stem , valve |
 |
|
|
