 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
03-13-2009, 08:35 AM
|
#1 | |
|
AF Regular
Join Date: Oct 2006
Location: east pittsburgh, Pennsylvania
Posts: 133
Thanks: 0
Thanked 0 Times in 0 Posts
|
1981 Chevette
Does anyone know if it is possible to remove the oil pan with out pulling the motor?
|
|
|
|
|
12-08-2009, 03:14 AM
|
#2 | |
|
AF Newbie
Join Date: Dec 2009
Location: New York, Alabama
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1981 Chevette
Yes,but oil pan gaskets don't leak very often its usually a front or rear crank shaft that is misdiagnosed.
|
|
|
|
|
|
03-12-2010, 02:55 PM
|
#3 | |
|
AF Regular
Thread starter
Join Date: Oct 2006
Location: east pittsburgh, Pennsylvania
Posts: 133
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1981 Chevette
The pan gasket wasn't leaking. I wanted to replace the oil pump because I thought it was shot. Turns out the person who replaced the head plugged up the oil galleries leading to the cam house with RTV. Runs good now.
|
|
|
|
|
|
03-03-2011, 10:56 AM
|
#4 | |
|
AF Newbie
Join Date: Mar 2011
Location: Folsom, California
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1981 Chevette
Yup i am sure you can change the oil pump. or else you can get it replaced completely that should work fine.
__________________
advertising link removed by Moderator |
|
|
|
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
