Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-17-2012, 10:28 PM | #1 | |
AF Newbie
Join Date: Oct 2007
Location: Sherwood, Arkansas
Posts: 44
Thanks: 11
Thanked 0 Times in 0 Posts
|
Harmonic Balancer Puller question
I'm currently working on replacing the Crankshaft Position Sensor. I rented the puller from Autozone. I got the retainer bolt off, then went to use the rented tool just to find out that the bolts in the kit were too big. I pretty ticked off cause I had to travel 50 miles to get this tool. The local auto stores didnt have any on hand. Does anyone know what size bolts is required?
|
|
03-27-2012, 01:36 PM | #2 | |
AF Newbie
Join Date: Mar 2012
Location: ME, Michigan
Posts: 5
Thanks: 2
Thanked 0 Times in 0 Posts
|
Re: Harmonic Balancer Puller question
EDIT: what year is your intrigue?
The crankshaft position sensor is above the startor, and the camshaft position sensor is under the coolant tank. No-need to pull the harmonic balancer. |
|
03-29-2012, 06:09 PM | #3 | |
AF Newbie
Thread starter
Join Date: Oct 2007
Location: Sherwood, Arkansas
Posts: 44
Thanks: 11
Thanked 0 Times in 0 Posts
|
Re: Harmonic Balancer Puller question
Not on this Intrigue, mine is a '99 with a 3800 series 2 engine. It's behind the pulley.
|
|
03-30-2012, 11:19 AM | #4 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: Harmonic Balancer Puller question
Go to your local hardware store and pick up some long bolts......I'm guessing they are 8mm or 10mm, not sure......
Get a variety of sizes to try, and then bring them back and get three of the ones that fit..... |
|
|
POST REPLY TO THIS THREAD |
|
|