 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
06-11-2016, 09:06 AM
|
#1 | |
|
AF Newbie
Join Date: Jun 2016
Location: Woodfin, North Carolina
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Mass Air Flow
Ok so I just replaced my mass air flow sensor about a week ago. My check engine light just came back on and when I scanned it it said mass air flow sensor. Any ideas what could be causing this to happen again? The codes are P0102, P0440, P0440.
|
|
|
|
|
06-11-2016, 12:08 PM
|
#2 | |
|
Confoundingly Lucid
Join Date: Oct 2005
Location: Mesa, Arizona
Posts: 3,897
Thanks: 5
Thanked 30 Times in 30 Posts
|
Re: Mass Air Flow
P0440 is the infamous gas cap code. You will get this if the cap is not tight, also if there is a leak in the evap system anywhere.
Inasmuch as the P0102 - does this have the factory intake system (airbox) or has it been modified? Check the condition of the wiring leading to the MAF.
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at http://www.silicon212.org/9c1! 2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness! 1967 El Camino L79/M20 old school asphalt raper Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have. |
|
|
|
|
|
06-11-2016, 12:39 PM
|
#3 | ||
|
AF Fanatic
Join Date: Oct 2007
Location: EVERETT, Massachusetts
Posts: 10,898
Thanks: 8
Thanked 432 Times in 431 Posts
|
Re: Mass Air Flow
Quote:
|
||
|
|
|
|
06-11-2016, 11:55 PM
|
#4 | ||
|
AF Newbie
Thread starter
Join Date: Jun 2016
Location: Woodfin, North Carolina
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Mass Air Flow
Quote:
|
||
|
|
|
|
06-11-2016, 11:56 PM
|
#5 | ||
|
AF Newbie
Thread starter
Join Date: Jun 2016
Location: Woodfin, North Carolina
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Mass Air Flow
Quote:
|
||
|
|
|
|
06-16-2016, 05:54 PM
|
#6 | ||
|
AF Fanatic
Join Date: Oct 2007
Location: EVERETT, Massachusetts
Posts: 10,898
Thanks: 8
Thanked 432 Times in 431 Posts
|
Re: Mass Air Flow
Quote:
should idle if the MAF is bad though. I would check that you have NO leaks after the MAF. also again the connector /wiring/ also check voltages at the MAF you tube has a good video. you will need a frequency meter for ONE of the readings which is the MAF output. only use MAF cleaner !!!!!!!! carb cleaner will kill it. |
||
|
|
|
|
 |
POST REPLY TO THIS THREAD |
| Tags |
| chevy , maf , massairflow , silverado |
 |
|
|
