15" Kicker S15L7 D2

[sfknls]

Brand:Kicker
Condition:New
Impedance:2 Ohm
RMS Power Handling:1000 Watts
Peak Power Handling:2000 Watts
Size :15 Inch

Would this speaker match this amp? There is an 4 Ohm version of that kicker also.


LANZAR 800 WATT RMS/1000w MAX CAR STEREO AMPLIFIER AMP

• 2 x 400 Watts RMS at 2 Ohms
• 2 x 500 Watts Max at 4 Ohms
• 1 x 1000 Watts Max at 4 Ohms Bridged
• Electronic Crossover Network
• Bass Boost Circuit
• Variable Phase Shift Control
• 2 Ohms Stereo Stable
• Anti-Thump Turn-On
• Soft Turn On/Off
• High & Low Level Inputs
• Blue Light Illuminated Crossover Control
• Power & Protection LED Indicators
• Advanced Protection Circuitry
• Bass Boost Remote Control
• T.H.D: 0.04%
• S/N Ratio: 90dB
• Channel Separation: 65dB
• Frequency Response: 5Hz- 35kHz
• Dimensions: 10.47''W x 2.46''H x 12''L

[bjboertje]

lanzar is overrated, but if you went with that amp you would need the 4 ohm version of the kicker.

[OffRoadSonoma]

I vote no. the specs you put don't seem right and I would try to get a lot closer to that 1000 rms.

[sfknls]

Originally Posted by bjboertje

lanzar is overrated, but if you went with that amp you would need the 4 ohm version of the kicker.

what do you mean by over rated, will it put out 1000watts like it says?

[OffRoadSonoma]

The most that amp will push is 1000 watts Max. Your sub wants 1000 watts all the time and 2000 max. And he means the name is over rated.

[sfknls]

Originally Posted by OffRoadSonoma

The most that amp will push is 1000 watts Max. Your sub wants 1000 watts all the time and 2000 max. And he means the name is over rated.

Well a friend of mines has this same 15", he knows nothing about amps or speakers, it just came with the car. The sub is perfect. All im asking is can this amp do the job. This speaker is a dual 4 ohm, and when they say bridged, do I have to wire both sides of the speak as one, and both of the channels as one?

[alphalanos]

That sub needs like two of those amps.

[OffRoadSonoma]

So this picture should be your sub. Now I think in your specs it should say 1 channel with 1000 watts MAX should be 2 ohm. So if your speaker is indeed a dual 4 ohm and you wire it like the pic it will present a 2 ohm load to your amp. Which you will have 1000 watts MAX. It will work with your speaker but I don't recommend it.

[sfknls]

Originally Posted by OffRoadSonoma

So this picture should be your sub. Now I think in your specs it should say 1 channel with 1000 watts MAX should be 2 ohm. So if your speaker is indeed a dual 4 ohm and you wire it like the pic it will present a 2 ohm load to your amp. Which you will have 1000 watts MAX. It will work with your speaker but I don't recommend it.

So basically, the 4 ohm speaker = 2ohm load and it wil be recieving 800 watts? I'm just trying to find the right amp for this speaker

[OffRoadSonoma]

Do you already own this amp or are you looking for a new one? I used a jbl 600.1 gti which ran about 580rms. And I had a s12l5 which needed 600 rms. If you are looking for a new amp I would definetly not buy that one. I would look for something with 1000 rms or something closer.

[sfknls]

Originally Posted by OffRoadSonoma

Do you already own this amp or are you looking for a new one? I used a jbl 600.1 gti which ran about 580rms. And I had a s12l5 which needed 600 rms. If you are looking for a new amp I would definetly not buy that one. I would look for something with 1000 rms or something closer.

As soon as I can find the amp ill click buy and its all set and done.
With this amp would I need the 2ohm version?
VISONIK V408XT 1000RMS 2 CHANNEL BRIDGEABLE CAR AMP

• 2 channel car amp
• 1000 watt peak output
• 500 x 2 RMS @ 2 Ohms
• 250 RMS x 2 @ 4 ohms
• 800 x 1 RMS @ 4 ohms
• MOSFET power supply and output stage
• preamp input and output
• fuse rating: 25A x 2
• 12-13/16"W x 2-1/2"H x 10-5/16"D
• 50Hz - 250Hz Low Pass Filter
• Built in high and low pass crossover system to fine tune speaker frequencies
• Variable Bass Boost 0-18dB
• Subsonic Filter 20 - 50Hz
• Fuse Rating: 25A x 2
• Variable Bass Boost 0 - 18dB @ 45 Hz
• Power/Protection LED
• RCA Line Inputs & Outputs
• Thermal/Short/Overload Protection Circuitry
• Adjustable Input Sensitivity
• Full MOSFET Circuitry
• Frequency Response: 20Hz - 20kHz
• THD <0.05%

[OffRoadSonoma]

How much are you looking to spend and what site are you at?

[sfknls]

Originally Posted by OffRoadSonoma

How much are you looking to spend and what site are you at?

Ebay!