Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
04-05-2009, 08:07 PM | #1 | |
AF Newbie
Join Date: Apr 2009
Location: RALEIGH, North Carolina
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
I need help setting timing points
I had replaced the gaskets in my 98 MPV and had removed the distibutor and need help setting my timing back.
|
|
01-11-2012, 01:09 AM | #2 | |
AF Regular
Join Date: May 2001
Location: San Francisco, California
Posts: 221
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: I need help setting timing points
I know this is old but i dont see any answer so imma answer it.
1) set piston 1 to tdc... U can take out sprk plug on cyl 1 and put in a long screw driver, move the crank until the screw driver at its highest point. Thats tdc. 2) point dist rotor to #1 marked on dist cap (the carbon side) 3) adjust timing degree according to the info under the hood. If u have obd2 scanner, u can read the timing degree in there without using timing light.
__________________
http://importfan_accord.homestead.com/files/New_Page_Accord.jpg |
|
|
POST REPLY TO THIS THREAD |
|
|