Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
04-11-2001, 09:38 AM | #1 | |
AF Newbie
|
I have a friend getting rid of some really nice MOMOs that he has on his Sentra. I believe his Sentra has a 4x11 lug pattern/size. When I tried to research a bit through the net for these wheels I only came across 4 or 5 lug patterns for the sizes, there was no specific lug size mentioned at the sites I went to. Is the 11.7 the lug nut or the opening in the wheel? If these wheels are not meant to fit my car, is there anything I can do to the wheels to fit them without causing too much harm to the car or my future health? Thanks for any info.
|
|
04-11-2001, 09:42 AM | #2 | |
Banned
Join Date: Mar 2001
Posts: 2,770
Thanks: 0
Thanked 0 Times in 0 Posts
|
I tried to put together a comprehensive wheel page for the G20 wheels and tires.
Try this... http://www.g20.net/mod_wheels.html In short unless it's a new, and I mean 2001 Sentra the wheels won't fit. The older sentras upto the new model change use a 4x100mm pattern. Then new Sentras use the same 4x114.3mm pattern that the G20 uses. Of course the wheels could have 8 holes with both bolt patterns on them, like the ones I just bought. |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|