Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-19-2002, 03:05 PM | #1 | |
AF Newbie
Join Date: Feb 2002
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
E30 2.7l stroker motor
Hello,
I am new to this board but I had a few questions. I have a 85 323i and 2 parts cars a 524td and a 325es. From these cars I plan to do a 2.7 stroker motor. Use the es block, 524td crank and the 323i head, rods. pistons and cam. I am getting a chip and header and K&N filter as well. Plus the suspension upgrades and LSD. Questions: I should have more HP but I want to keep it a very tourqey motor. This being said should I buy higher compression pistons? higher duration cam? Another question is can the Aireasearch turbo be used from the td if I create an exhaust manifold that will fit the m20? Thanks for the input, tricked e30 |
|
02-19-2002, 03:24 PM | #2 | |
AF Enthusiast
|
That sounds like an interesting project , and hell of work too , i think everything of this is actually possible , but it's just the question is it worth the work that has to be done... If you want to turbo it don't get high duration cam or high comp pistons , but if not i would give it a try... anyway i don't know how the turbine from the diesel will work with the M20 , i have done something quite similar , i have put the entire engine and drivetrain from an 850 Csi to an E34 with a couple of friends... Anyway i wish you good luck...
|
|
02-19-2002, 03:36 PM | #3 | |
AF Newbie
Thread starter
Join Date: Feb 2002
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks,
My brother and law and I are actually going to do the motor? It will be a fun project that I will document over the net. I hope to have it done in 3 months or so. I am also doing this because we plan to make bolt one m20 performance parts, so this will be a good test as well..... |
|
|
POST REPLY TO THIS THREAD |
|
|