Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-08-2006, 09:21 AM | #1 | |
AF Newbie
Join Date: Jun 2006
Location: albion park
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
changing clutch 92 barina
could someone explain steps for changing clutch please.
|
|
07-03-2006, 03:05 AM | #2 | |
AF Newbie
Join Date: Jun 2006
Location: Sydney
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: changing clutch 92 barina
well, first you have to raise the car and remove the gearbox, then you have to remove the clutch as it should tell you in the clutch kit, then install the new clutch and refit the gearbox to the car, reconnect all linkages and reverse light switch and then road test, make adjustments as needed and all should go well. btw u will have to drain the gearbox of all fluid before you remove it from the car, there should be a drain plug, undo it below a suitable container. once it has drained, reinstall it. just remember to refill the gearbox with the right fluid before road testing.
__________________
-Ben |
|
07-03-2006, 09:03 AM | #3 | |
AF Regular
Join Date: Apr 2004
Location: Coffs Harbour
Posts: 485
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: changing clutch 92 barina
machine the flywheel before fitting the new clutch.
replace the rear main oil seal, while you have the gearbox out.
__________________
N14 Pulsar VQ35 conversion with major N/A upgrades, 6 spd FWD manual HLSD 18" Rims, big brake kit, Coil overs and freshly painted Smashed Black VY SS Ute The workhorse... Twin turbo 5.7L LS1 Boyd Coddington 19" Turbine Wheels AP Racing 4 Piston Brakes Tein Coil over Suspension HKS EVC 6 Boost Controller PLX Devices DM-200 OBDII Custom Front Mount Intercooler |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|