Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
12-16-2005, 04:33 AM | #1 | |
AF Newbie
|
1991 Isuzu Pickup 2.6L Auto - Transmission / Overdrive Problems
1991 Isuzu Pickup
2.6L FI - 4ZE1 4 speed Automatic Problem: No 4th gear (overdrive) ok, so far: i've posted on isuzupup.com, but so far, i haven't been able to solve it http://www.isuzupup.com/forum/viewto...ight=overdrive from that i've heard it could be an overdrive temperature sensor, but i can't find it on the intake (where it's supposed to be), only the dash temp sensor gauge apparently it's a somewhat common problem on isuzu's, but it's not helping me problem: my intake (1991) doesn't match the one in the 4x4wire.com picture http://www.4x4wire.com/forums/showfl...=&fpart=1&vc=1 also checked some of the vacuum lines, but they all seem to be correct seems like an electrical problem to me, but i'm afraid it could be the transmission i paid $280 for the truck, getting another trans would be like $300 and i can't use my truck for long distance driving, being limited to around 45 mph, w/out high-revs that drain my gas tank anyone have access to tech information (wiring diagrams, vacuum diagrams) that i can use? or does anyone know where the sensor is or how i can find it? has anyone had to deal with this problem? |
|
03-01-2014, 08:17 PM | #2 | |
AF Newbie
Join Date: Mar 2014
Location: Lake Elsinore, California
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1991 Isuzu Pickup 2.6L Auto - Transmission / Overdrive Problems
Have you figured out the issue? I am having the same problem.
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|