Pagani Zonda F

[stratos75]

2 Niro750, jano11: Thank you!

Dear Ioan, I need more than 48 hours in a day to speed up my projects. I hope the printer will help me a bit.

[jano11]

I sure will! Having prototyping at your fingertip is a big step forward. I am glad you have it now.
Next you need a time machine! If you find one let me know, I'll buy one immediately. ;-)

[stratos75]

Today, the gearbox was printed.

[bejonek]

Nice work, Mikhail. Go!

[stratos75]

Some works on the engine was done to fit the intake manifold.

[jano11]

Engine looks very nice!

[stratos75]

The rear subframe just from 3D printer.

[stratos75]

[sky1911]

Hi Mikhail,

I assume there are pictures in your last few posts? I can't see anything there :S. I'd love to see the latest steps on your Zonda

[stratos75]

to sky1911: It is very strange, that you don't see the photos. I have been using the same photobank for many years.
Probably, you have some restrictions to the Russian sites. You can try any additions like https://fri-gate.org/ , https://browsec.com/en/, etc.

[sky1911]

Cheer Mikhail,

I checked on another computer with another browser. As it turns out, an anti-tracking extension I've added to Chrome on my main rig is causing the images not to be shown.
They showed just fine on the other machine.

Great work on the Zonda!

[stratos75]

Coming soon! The exhaust system. 3D from my brother.

[jano11]

Man, that exhaust looks really good!

[stratos75]

I have found in my stash the needed muffler ends.


Some improvement on an air filter. I printed a new upper part of a case.




The 3D assembly.

[stratos75]

My brother has built the upper arms and anti-roll bar.