Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Engineering/Technical Ask technical questions about cars. Do you know how a car engine works? |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-01-2002, 08:37 PM | #16 | |
Master Connector
|
Quite bickering you two! enough is enough.
Your arguing over misunderstandings. Its pointless, and will never get either of you anywhere.
__________________
Connecting the Auto Enthusiasts
|
|
01-03-2002, 03:52 AM | #17 | |
AF Fanatic
Join Date: Dec 2001
Posts: 6,943
Thanks: 0
Thanked 0 Times in 0 Posts
|
hey moppie, u mentioned earlier something about TB... would any other honda TB fit onto the b16 or do u need to get an aftermarket brand??
i have access to a die grinder so i can bore it out a couple mm but i dont wana risk stuffing it up |
|
01-03-2002, 06:35 PM | #18 | |
Master Connector
|
Both Type-Rs have larger TB's that will fit, but remember its a waste of time fitting one unless the engine actualy needs more air, i.e. its got some lumpy cams.
There are also quite a few aftermarkets ones avlaible, have a hunt around you'll find them. When you enlarge one yourself you also need to make a new larger throttle plate, so don't even think about going any where near it with a die grinder. To do it properly its a job for a machine shop.
__________________
Connecting the Auto Enthusiasts
|
|
|
POST REPLY TO THIS THREAD |
|
|