I need dimensions on the VH45 engine im planing on droping it into another car for drag racing. What year/model engine would be most apropriet in terms of strength to turbo charge. The exact measurements i need is from the bottom of the sump where it bolts onto the bottom of the block NOT the extream lower part of the sump where the oil is held- to the top of the cylider bores or bottom of the head. Also the width at the top of the block left to right. Also the width of the block at the top of the block, the width of the engine without the exhaust manifolds.
10-17-2002, 05:21 PM
