Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-23-2010, 02:44 PM | #1 | |
AF Regular
Join Date: Aug 2003
Location: Jasper, Georgia
Posts: 114
Thanks: 0
Thanked 0 Times in 0 Posts
|
Another bad Injector
I,m getting very tired of this car I had another injector go bad #3 right behind the front plenum runner, was able to fish it out with out removing the intake. Is this going to be a common thing until I replace them all? Should I just sell it? Also now I think I have a fouled plug as I tore a O ring on the install and it flooded the car on startup . It idles ruff from 1500 rpm to 2000 and this did not happen on the last installs. POS!!!!
|
|
01-24-2010, 12:07 PM | #2 | |
AF Regular
Join Date: Aug 2002
Posts: 155
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Another bad Injector
Much easier to replace injectors in rail once out of the car. Damaging O rings is common otherwise and hydraulic locking is a sure way to bend a rod.
There is a way to switch to the later rotary pintle injectors which are not so susceptible to ethanol if you have an earlier 1990-1993 G50.
__________________
Brian 1995 Q45 & Q45t 2000 Q45 |
|
|
POST REPLY TO THIS THREAD |
|
|