Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-17-2012, 04:52 PM | #1 | |
AF Newbie
Join Date: Mar 2009
Location: malibu, California
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
|
Did I fry my ECU??!!
'01 X3.0i auto;
This morning I was trying ton confioirm Peak code 7b (Thermostat map control) which as I understand, is related too the heating element of the main Thermostat (2 prong connector on top, just behind the top of the fan blade). To check that I was getting power to the plug/heater element, I connected my volt meter to the 2 prongs in the plug/harness side and turned the key on while watching. The meter bleeped a bit but nothing, so I dicided to start the engine and see if that would bring the power up. No start. It turns over but wouldn't start. Replugged the connetor - same. Checked all related fuses - OK. Disconnected the battery for an hour - same. Any help on something like this?? THANKS IN ADVANCE!! Worried |
|
03-17-2012, 06:54 PM | #2 | |
One Hot Shot
Join Date: Mar 2010
Location: Venice, Florida
Posts: 444
Thanks: 29
Thanked 28 Times in 27 Posts
|
Re: Did I fry my ECU??!!
I don't know much about your car but hope someone will help you soon.
|
|
|
POST REPLY TO THIS THREAD |
|
|