Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
10-22-2004, 03:06 PM | #1 | |
AF Newbie
Join Date: Oct 2004
Location: Pittsburgh, Pennsylvania
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Keyless Entry Programming Instructions
Does anyone have these, or know where to get them?
Thanks in advance. |
|
11-05-2004, 09:28 AM | #2 | |
AF Newbie
Join Date: Nov 2004
Location: London
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi,
Did you ever find out how to do this? If so how ;-) Thanks |
|
11-05-2004, 09:38 AM | #3 | |
AF Newbie
Thread starter
Join Date: Oct 2004
Location: Pittsburgh, Pennsylvania
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Keyless Entry Programming Instructions
Yes -- found it on another forum. Go to http://forums.vmag.com/suvvit0199/messages/1942.html
Haven't tried it yet, so don't know if it works. Good luck |
|
11-05-2004, 09:50 AM | #4 | |
AF Newbie
Join Date: Nov 2004
Location: London
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi,
Thanks for that. Doesn't cover the XL-7 sadly :-( Paul |
|
01-14-2005, 07:05 PM | #5 | |
AF Enthusiast
Join Date: Jan 2005
Location: everett, Washington
Posts: 193
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Keyless Entry Programming Instructions
xl-7 programming instructions first you need to stuff your head up under the dash and locate your module drivers side upper corner under dash does it say programmable transmitter (the first models had no programable modules) if it says that then......
1 confirm all doors are shut and key is out of ignition 2 open drivers door insert key and turn to on within 10 sec 3 turn ignition switch to off in 10 sec 4 push and release drivers door switch 3 times in 20 sec 5 turn ign. switch to on in 10 sec 6 turn ign. switch to off in 10 sec 7 press and hold lock and unlock button on transmitter for 5 sec within 20 sec of step 6 alldoors will lock/unlockto confirm correct process 8 press lock unlock buttons on second remote within 5 sec after step 7 once again all doors will lock/unlock to confirm 9 to add another remote up to a max of four repeat steps 1 through 8 this was taken directly out of an owners manual supplement that comes with a new keyless entry kit (part number for a xl-7 or grand vitara can't remember which one it goes to but it works on either one is 84900-67810) which you would have to purchase if yours is not programable these instructions are the same for vitara, grand vitara, xl-7 and the esteem hope this helps |
|
06-30-2005, 01:58 AM | #6 | |
AF Newbie
|
2002 XL7 Remote Program Instructions needed
I saw the programing instructions on this thread and I am wondering if anyone knows about the programing instructions for a 2002 XL7 for the keyless entry? I have read several places that the kind people that created this keyless system in the 2002 made it so you cannot reprogram it and you have to replace the entire keyless entry system. has anybody found this to be true? and if not do you know the reprograming instructions for this unit?
does anyone know what model i need for my 2002? I have one remote but the sticker is torn off the back so i dont know if i need a MOZD02TB or a MOZD01TB remote. thanks in advance for the help! |
|
11-09-2013, 01:15 PM | #7 | |
AF Newbie
Join Date: Nov 2013
Location: Sydney
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Keyless Entry Programming Instructions
|
|
|
POST REPLY TO THIS THREAD |
|
|