Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-31-2011, 02:32 PM | #1 | |
AF Newbie
Join Date: Oct 2004
Location: Knoxville, Tennessee
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
96 PAU intake manifold gasket replacement
96 PAU with an intake manifold gasket leak. How do I replace all gaskets associated with the manifold? If you can supply pictures of the lower gasket, I'd appreciate it. I saw a thread about the gasket replacement but couldn't find how to replace it or exactly where the lower gasket is.
|
|
05-31-2011, 04:52 PM | #2 | |
AF Regular
Join Date: Aug 2010
Location: Coquitlam
Posts: 319
Thanks: 12
Thanked 33 Times in 31 Posts
|
Re: 96 PAU intake manifold gasket replacement
Check the following:
http://www.automotiveforums.com/vbul...lay.php?f=2144 BNaylor seems to have a lot of experience and knowledge, you can't go wrong with his advice. A couple of other forums have dedicated tech sections with detailed instructions. They're not hard to come by using google. |
|
06-02-2011, 05:55 AM | #3 | |
AF Moderator Elite
Join Date: Feb 2005
Location: Gilligan's Island, Florida
Posts: 5,762
Thanks: 83
Thanked 72 Times in 72 Posts
|
Re: 96 PAU intake manifold gasket replacement
When replacing the gaskets on an '96 Ultra (Series II Vin-I) you should replace the following:
FEL-PRO Part # MS95977 1st Design; w/Rubber end seals w/o Locating pins; Lower set FEL-PRO Part # MS95744 Plenum Gasket Set; Upper set FEL-PRO Part # 61024 Throttle Body Gasket ACDELCO Part # 217454 or STANDARD MOTOR PRODUCTS Part # SK9 SEAL KIT,F/INJR(O RING
__________________
Knowledge can be communicated, but not wisdom! |
|
|
POST REPLY TO THIS THREAD |
Tags |
gasket , manifold , pau |
|
|