Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-22-2010, 10:04 AM | #1 | |
AF Newbie
Join Date: Jun 2010
Location: ramona, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
ABS and Traction Control Lights on after Jump start
Jump started my '99 Seville SLS from under the hood. Let some factory installed smoke out from near the coils. Now I have some lights on the dash, ABS and Traction Control & two messages, Service Stability Sys & Service Steering Sys. Brake pedal seems a bit stiff and steering is a bit stiff. White smoke from exhaust when first started, but seems to drive okay. Any suggestions?
Thanks! Jerry |
|
06-22-2010, 05:44 PM | #2 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,947
Thanks: 25
Thanked 369 Times in 363 Posts
|
Re: ABS and Traction Control Lights on after Jump start
You need a full scan to access the bcm anti lock/steering codes.
__________________
|
|
06-23-2010, 11:39 AM | #3 | |
AF Newbie
Thread starter
Join Date: Jun 2010
Location: ramona, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ABS and Traction Control Lights on after Jump start
I used my friends ODBII scanner and did not get any codes.
|
|
06-23-2010, 11:48 AM | #4 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,947
Thanks: 25
Thanked 369 Times in 363 Posts
|
Re: ABS and Traction Control Lights on after Jump start
A regular obd11 scanner will not access abs codes, you need a high line scanner such as Snap- On, MT or MTG 2500.
__________________
|
|
06-23-2010, 10:17 PM | #5 | |
AF Newbie
Thread starter
Join Date: Jun 2010
Location: ramona, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ABS and Traction Control Lights on after Jump start
Okay, Thanks!
|
|
05-11-2011, 08:45 AM | #6 | |
AF Newbie
Thread starter
Join Date: Jun 2010
Location: ramona, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ABS and Traction Control Lights on after Jump start
Dealer replaced EBC (Electronic Brake Control) Module.
Problem Fixed. Thread is now dead. |
|
|
POST REPLY TO THIS THREAD |
Tags |
abs , control , stability , steering , traction |
Thread Tools | |
|
|