Yamaha YZR-M1 2009 Sterilgarda

[SandroSilva]

This is my new model, I'll go with the Yamaha M1 model piloted by American Ben Spies in the last race of the year 2009.





Here the picture the motorcycle in action.





I will still take a while to start, because I have two motorcycles in progress, M1 USA Yamaha and Honda LCR, but are already in final stages.

Sandro

[John18d]

Hi Sandro - I will follow you build - good luck - I know this will be good - John

[andrew59it]

Sandro beutiful choice....
I will follow too....

[miguel s]

one more follower.
im sure this will be a 5 stars post. Does anyone bet?

[SandroSilva]

Let's update this topic.

Here are some pieces that will be replaced by the Top Studio resin and other resin that will acrescentas the model.





Here the balance, which was locked from the inside, and the support of the bridge that was replaced with photoetch.














Frame motorcycle with all the holes for the screws, and the instrument panel that was removed for the installer by the panel in resin.






Sandro

[John18d]

great update Sandro - what putty do you use to fill on the swing-arm? "miliput"? please include lots of pictures for this build and if you make a Top Studio chain please do a tutorial with all the steps showing how and what you use to build the chains. lastly where did you get the resin "airbox" and "snorkel" in the first picture? Thanks Sandro - good start - John

[SandroSilva]

John, I use epoxy mass, and the air box is the first image Top Studio.

Let a few more updates.

Rear suspension practically ready.





This piece was replaced by components T2M




Engine





Here the clutch cover, which will be installed on the side of the engine



Motor practically ready, lacking only a few details to be pasted in photoetch.








Rear Bumper and Radiator







Placing Carbon Fiber in many parts










This part is where the electronic part behind the instrument panel, a lot of work but the result was very good.






Sandro

[John18d]

Damn Sandro - that is way cool - great pictures and full explanations - love this work
it is so vivid and clean

John

[The Sheene Machine]

Incredible level of detail and comittment of funds...T2M parts all over the place!!!! Fantastic stuff.

[sjelic]

Fantastic, very neat and precise.

[gp-models]

beautiful start!
The attention to details is incredible, where is my popcorn?!

[SandroSilva]

Tanks guys.

Now I think I'm going crazy , doing all the engine wiring and panel.










Sandro

[John18d]

Sandro - what type of "wire" are you using? Is that T2M wiring? or the wire/solder from Top Studio? Do you have to paint it or does it come with those colors?? - Thanks

John

[SandroSilva]

John, I'm not sure I understand your question , but as the wires they already comes with the top studio kit.

Balance and finished frame.

Here the balance with just the brake caliper.




Now with the brake caliper with the appropriate cable and brake sensor.







Motorcycle Frame, now with all the screws, parts and electronic parts in PE.






Balance and frame together, just to get an idea



The front of the fairing, where are the tanks of liquid radiator.



Now some parts of the fairing already painted, just waiting for the last coat of varnish.




Sandro

[John18d]

WOW Sandro - your work is so sanitary - it is so clean and detailed

Ref- the wire question - it was answered when you said it was Top Studio kit wire.

Beautiful addition to the thread Sandro - the work and the pictures are exquisite

John