revell 1/24 audi DTM

[soono87]

Hi
It's first time I posting on AF. Nice to meet you

I'm Korean, and I'm not good at conversation in English.
But I'd like to sharing my work process with you guys, so I'm writing this on AF

Now I'm working revell DTM project since March.


↓ First. Revell kit usually has dull and thick molds and detail. So I focused on reviving body shape and character lines.




↓ Replace some part of deffuser. I used 0.2T aluminum plate


↓ This is the original part


↓ Remove and..


↓ Cut it to apply aluminum plate


↓ insert and trim it. It's more stronger than just glue the part


↓ After surfacer. It looks better than original, isn't it?



PS. PE parts by KA-models

[mike@af]

This look like it is sure to be a great build. I really like the detail you have put in!

[sportracer02]

Look good so far, nice photos of what you did, this thread will be helpful

[Shunter]

Nice start and i do like what you have done with the diffuser. Which car will this be?

[soono87]

Thank you for comments!

Continuously..
I did a lot of works and remodeled some parts, but I didn't take enough pictures to introduce it.

↓ I disassembled rear wing because original part is too thick.
Trim wings more slim and make new winglets by aluminum plate. And apply CF and decals




↓ I completed brake parts and made new muffler tip using by 6mm aluminum pipe




↓ Assemble wings and exhausts


↓ Biggest work on front body parts.. And apply CF almost parts.

[rollin80s]

another great looking dtm build. keep it going man, that carbon work looks fantastic.

[kans0002]

Originally Posted by soono87

Hi
It's first time I posting on AF. Nice to meet you

I'm Korean, and I'm not good at conversation in English.

Welcome!

Your english is not bad at all! You should see my Korean!

[jano11]

Great start!

If I may add one critical comment, I would have taken care of those sink marks on the underbody before applying the CF decals.

Keep it up!

[Shunter]

Sweet job on the CF work, those curves look like they would have been a nightmare to cover.

[soono87]

Originally Posted by kans0002

Welcome!

Your english is not bad at all! You should see my Korean!

Thank you for comment! When I writing posts on AF, dictionary always on my side I hope it's gonna be better.

Originally Posted by rollin80s

another great looking dtm build. keep it going man, that carbon work looks fantastic.

Thank you. I'm doing my best(maybe..).

Originally Posted by jano11

Great start!

If I may add one critical comment, I would have taken care of those sink marks on the underbody before applying the CF decals.

Keep it up!

Yeah, I agree. But when I working on underbody, I was exhausted
It's OK, I won't see that anymore after complete it.

Originally Posted by Shunter

Sweet job on the CF work, those curves look like they would have been a nightmare to cover.

Thank you. Nightmare? You absolutely right! But one more nightmare is left. I will post it soon!

[soono87]

Hello again!

I'd like to start this post with my favorite work

↓ This is my favorite part, radiator grill!
Drill original part and glue PE mash. Make 4 hole on mash for emblem.
And make grill border by 0.6mm plastic beam


↓ After that, painting it chrome. I use SMP chrome silver


↓ Finish Wheels&tires. I brought tires by Tamiya DTM kit.
Also I added O.Z RACING decal on wheels by Tamiya WRC decal. O.Z decal is not include original Revell kit.
Finally, Make tires rough


↓ Another CF works. Nightmare
I'm not good at detail works on interior, so some parts are unclean.






↓ Temporary assembly engine and Front radiator parts. Not bad.


↓ Body work. I air-sprayed Finisher's GP1 urethan clear and sanded it.
One more clear coat is left. I will spray matt clear on the whole body parts but roof and silver side.






Thank you for watching.
umm.. maybe 7% more precess left

[kans0002]

that front grill is awesome!

[MidMazar]

Thanks for sharing. Really sweet progress you got there. Also don't worry if your english isnt good, all we need is pictures to understand. Keep us updated!!

[mike@af]

This is continuing to be an amazing build. It gets better and better!

[Shunter]

I think you own shares in a CF decal company....lol Great job on the grill and getting the CF work on the interior.