Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-29-2010, 09:01 PM | #1 | |
AF Newbie
Join Date: Jul 2006
Location: borrego springs, California
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Help With Transmission Choice
Hello all!
I am attempting a learn as I go hot rod project on a 1978 Elky. I think I am going to pull a 350 from pick n pull and rebuild it. I am obviously hoping for higher power / torque than most average rides. My question is this: If I rebuilt a 350 and put a supercharger on it, what manual tranny would match up to that? I have heard that a Super T10 would do the job, but I would rather have a 5 speed. Along that line I have heard good things about a T-5, but I also hear the case is too weak for the power that will be running to it. Any advice would be appreciated. |
|
08-03-2010, 11:42 PM | #2 | |
AF Regular
|
Re: Help With Transmission Choice
my buddy thought itd be a good idea to rebuild a 350. Granted hes not the best mechanic, but he still spent more on it (not the mention the time) than he would have spent if he just got the new 350 that gm goodwrench makes.
I i were you I'd get the goodwrench 350, maybe a tko tremec 5 speed tranny (or whatever matches it), throw on the supercharger if its still in the budget and run that. i may be biased but another good way to go is to drop in an ls series motor (car or truck). It may cost more initally but the driveability cant be beat (even with a supercharger)
__________________
1980 El camino 2002 LS1 swap |
|
08-10-2010, 03:14 PM | #3 | |
AF Newbie
Thread starter
Join Date: Jul 2006
Location: borrego springs, California
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Help With Transmission Choice
Dropping a crate would be easier yea and cheaper. But money isn't the issue here. I wanna be able to say I built this. you know? Thanks for the tranny advice though
|
|
08-11-2010, 08:21 AM | #4 | |
AF -Advisor
Join Date: Feb 2004
Location: Chesterfield, Virginia
Posts: 2,549
Thanks: 0
Thanked 6 Times in 5 Posts
|
Re: Help With Transmission Choice
I have a couple suggestions...
First, the "crater" IS "easy", but hardly a good choice. They are "generic" in nature, and seldom actually MAKE the purported power. We've also "cleaned up" after several. Not very well assembled... A 383 (stroked 350) might be the hot lick. With a 6" rod, this is a VERY effective performer, and quite durable. A ProCharger will make big power with it, and not be TOO hard on internals. It also has very little parasitic loss. For a complete "combo", I can elaborate if you wish. Many "local" machine shops frown on "keyboard cowboys", and haven't always "heard" of "us". The Kiesler "kit" with the TKO-900 would be the 5-speed of choice with so much power. They "live" behind BBCs and Pontiacs, so a small block probably can't "hurt" it. Jim |
|
|
POST REPLY TO THIS THREAD |
|
|