Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-10-2012, 09:20 PM | #1 | |
AF Newbie
Join Date: Sep 2009
Location: In Texas, Texas
Posts: 26
Thanks: 0
Thanked 0 Times in 0 Posts
|
95 Roadmaster pulley noise
95 Roadmaster, the pulley below the alternator and above the AC compressor. How do I pull it. Constructive comments welcome
Thanks GT |
|
02-11-2012, 11:27 AM | #2 | |
Registered Offender
Join Date: Mar 2006
Location: Rural
Posts: 6,513
Thanks: 6
Thanked 341 Times in 336 Posts
|
Re: 95 Roadmaster pulley noise
That's the power steering pump. You can use a puller designed for some of the CS series alternators an PS pumps to remove that sheave.
Is the sheave damaged? Wobbling? Noisy?
__________________
Permanent seat assignment on the Group W bench... Automotive Forums Survival Guide |
|
02-11-2012, 06:50 PM | #3 | ||
AF Newbie
Thread starter
Join Date: Sep 2009
Location: In Texas, Texas
Posts: 26
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 95 Roadmaster pulley noise
Quote:
The sheave is in good shape but the bearing is squalling bad and about to go out. The pulley's hub has recesses for a puller. It also appears there are 4-5 bolts behind, and outside of the pulley's diameter. Like it might come off as one unit. If this is power steering pulley I appologies Bowtie. I just have to spend more time with it. And with no info in the manual any help is very much needed. Thanks Again... GT |
||
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|