Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-14-2014, 07:51 PM | #1 | |
AF Regular
Join Date: Jan 2008
Location: Colorado
Posts: 190
Thanks: 1
Thanked 1 Time in 1 Post
|
98 Intrigue - engine won't rev above 4000 RPM in drive
Hey all, so I bought this car as a mechanics special a couple months ago. Engine needed a new intake manifold and the timing cover was off for some reason, so I threw a new chain and tensioner on while it was open.
Finally got everything put back together and it runs really good, but it seems to lack power. If I floor it, it takes a good 8 seconds to get to 45 MPH and that's about as fast as it'll go. The engine will get to 4000 RPM and begin to stumble as if it's hitting the park/neutral rev limiter. Whats going on here? Does the ECM think I'm in park? Did I get the timing wrong? Fuel supply problem? |
|
06-14-2014, 08:36 PM | #2 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: 98 Intrigue - engine won't rev above 4000 RPM in drive
Could be a bad cat......
|
|
06-14-2014, 11:01 PM | #3 | |
AF Regular
Thread starter
Join Date: Jan 2008
Location: Colorado
Posts: 190
Thanks: 1
Thanked 1 Time in 1 Post
|
Re: 98 Intrigue - engine won't rev above 4000 RPM in drive
Thought about that as well. I noticed the exhaust manifold gets awfully hot awfully fast. I think I'll investigate the cat further...
|
|
06-14-2014, 11:06 PM | #4 | |
AF Enthusiast
Join Date: Dec 2001
Location: clarksville, Tennessee
Posts: 1,704
Thanks: 23
Thanked 184 Times in 180 Posts
|
Re: 98 Intrigue - engine won't rev above 4000 RPM in drive
__________________
Post back, that's what makes Forums Work. |
|
06-15-2014, 02:30 PM | #5 | |
AF Regular
Thread starter
Join Date: Jan 2008
Location: Colorado
Posts: 190
Thanks: 1
Thanked 1 Time in 1 Post
|
Re: 98 Intrigue - engine won't rev above 4000 RPM in drive
BTW, drove it again today and when I floored it, CEL started flashing and it dinged at me. I've got code P0300 now, random multiple misfire.
I changed the crankshaft position sensor since the harmonic balancer was off which I realize now may have been a mistake. I didn't know you had to do a relearn after that. Would not doing a relearn cause such a lack of power? |
|
06-15-2014, 06:46 PM | #6 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,953
Thanks: 25
Thanked 371 Times in 365 Posts
|
Re: 98 Intrigue - engine won't rev above 4000 RPM in drive
Check the cat first.
__________________
|
|
07-10-2014, 08:21 AM | #7 | |
AF Regular
Thread starter
Join Date: Jan 2008
Location: Colorado
Posts: 190
Thanks: 1
Thanked 1 Time in 1 Post
|
Re: 98 Intrigue - engine won't rev above 4000 RPM in drive
Thanks everybody! It was the cat. Loosened the bolts holding it to the exhaust manifold and it ran much better. Finally got time to put a new cat on today and it runs like a totally different car, easily goes over 4000RPM and shifts better too.
Still getting P0300 when I floor it though. Gonna change the plugs and see what happens. Not sure it'll fix anything, I have a feeling it's fuel system related. Already swapped coils out with no luck. EDIT: Fixed it! It was a faulty ignition wire. Started pulling plug wires and one left its guts behind. I just bought those things too... I put the old wires back on and this thing will burn rubber now. Last edited by Tobey; 07-10-2014 at 10:42 PM. |
|
|
POST REPLY TO THIS THREAD |
|
|