Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-21-2011, 08:58 PM | #1 | |
AF Regular
Join Date: Mar 2005
Location: Grand Rapids, Michigan
Posts: 183
Thanks: 0
Thanked 0 Times in 0 Posts
|
78'Eldorado Transmisson
78' Eldorado 425 transmission.I replaced the vacum modulator because it was not shifting up into3rd gear until 50-55 mph.When I did that I found a broken wire ,thought it was for reverse lights.Took car for test drive and tranny shifts great.Then I repared the broken wire and took the car for another test drive, transmisson only has second gear,no low or third gear.Found wire was for detent solenoid.I disconnected the wire and transmission shifts good again.What's up with that? Will it damage the transmission if I leave the detent solenoid disconnected?It upshifts and downshifts good when the solenoid is disconnected.Diesel1962
|
|
08-22-2011, 11:37 AM | #2 | |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,947
Thanks: 25
Thanked 370 Times in 364 Posts
|
Re: 78'Eldorado Transmisson
Only for kickdown, leaving it off is not an issue.
__________________
|
|
08-22-2011, 06:58 PM | #3 | |
AF Regular
Thread starter
Join Date: Mar 2005
Location: Grand Rapids, Michigan
Posts: 183
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 78'Eldorado Transmisson
Thank's for reply,Max. I talked to another mechanic at work today and he said that leaving the solenoid disconnected would not harm the transmission.Now am going to replace R.H axle shaft and do some body work.Should be a good car as it only has 66,000 miles on it!Diesel1962
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|