 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
08-18-2020, 06:12 PM
|
#1 | |
|
AF Newbie
Join Date: Dec 2016
Location: Baltimore, Maryland
Posts: 22
Thanks: 2
Thanked 0 Times in 0 Posts
|
2008 grand Cherokee, random misfire
I have a 2008 Jeep Grand Cherokee 3.7 liter. I am getting a p0300 random misfire code. I can not figure it out for the life of me. I have changed all 02 sensors, the MAF sensor. All the plugs and coils. The converter is not clogged but the plugs are black like it is not getting enough fuel. I have 60psi at the fuel rail. I have also changed the injectors. I have searched high and low for a vacuum leak, I feel like I hear something but believe it’s just the throttle body (which i have also changed). The Jeep will idle decent when first started for about 1 minute and gradually get worse and worse until the point where it will not idle unless I am giving it gas. Does anyone have any other ideas?
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
