Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
03-06-2010, 03:55 PM | #1 | |
TonyMadrid
Join Date: Dec 2003
Location: Port Jervis, New York
Posts: 39
Thanks: 0
Thanked 0 Times in 0 Posts
|
O2 sensor codes
Hi everyone,
I have a 2001 Grand Vitara and the check engine light came on. When I checked with a code reader it showed 8 codes (one for each of the four O2 sensors and an additional four of the same number codes, but indicated as pending codes). I was able to reset/erase all of the codes with the exception of the two upstream sensors. So I replaced the two upstream sensors and when I stared the engine the check engine light was out, but at the next start it came on. When I checked the codes I got the same result as when I first checked it, i.e. eight codes. This time I was able to erase all of them, but at the next start the check engine light again came on. Is there a time period needed for the codes to be able to properly reset, such as a number of starts? If not, where do I go from here? Any help would be greatly appreciated. Tony |
|
|
POST REPLY TO THIS THREAD |
|
|