Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Car Modeling Share your passion for car modeling here! Includes sub-forum for "in progress" and "completed" vehicles. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-12-2015, 12:11 PM | #1 | |
AF Newbie
Join Date: Oct 2008
Location: Singapore
Posts: 51
Thanks: 2
Thanked 0 Times in 0 Posts
|
Mixing Finishers Urethane Clear GP1
Hi everybody....
Does anyone knows how to mix the finishers GP1.... The instruction is in Japanese and what are the contents of each individual bottle? |
|
06-12-2015, 03:16 PM | #2 | |
AF Enthusiast
Join Date: Mar 2005
Location: Barnsley
Posts: 3,199
Thanks: 8
Thanked 111 Times in 107 Posts
|
Re: Mixing Finishers Urethane Clear GP1
You have a clear coat, a hardener and thinner. Whatever quantity of clear you add you need half as much hardener, for example 50 ml of clear, 25 ml of hardener, the ratio is always the same. You can vary the thinner amount but usually between 10 and 30% is good. Personally I go more on the thinner to make it flow better, but it's down to personal choice. Hope this helps
__________________
Steve Noble |
|
The Following User Says Thank You to stevenoble For This Useful Post: |
khairy1974 (06-12-2015)
|
06-12-2015, 05:52 PM | #3 | |
AF Newbie
Thread starter
Join Date: Oct 2008
Location: Singapore
Posts: 51
Thanks: 2
Thanked 0 Times in 0 Posts
|
Re: Mixing Finishers Urethane Clear GP1
Thanks steve....
|
|
|
POST REPLY TO THIS THREAD |
|
|