Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-13-2004, 12:11 PM | #1 | |
AF Newbie
Join Date: May 2004
Location: brisbane
Posts: 10
Thanks: 0
Thanked 0 Times in 0 Posts
|
husaberg fuel/carby problem
ok here the problem i will ride my bike along flat bikkys it will pull hard till about 180 then it runs out of fuel so i shut the throttle and wait till it gets fuel again its like the bowl runs out of fuel or somthing any body got any ideas.....
cheers doug
__________________
get my licence back in 2006 yeeeeeee haaaaaaaaa |
|
05-13-2004, 04:39 PM | #2 | |
AF Enthusiast
Join Date: May 2004
Location: kaladar
Posts: 178
Thanks: 0
Thanked 0 Times in 0 Posts
|
im just a kid so dont get irritated by my stupidity but i would imagine that there seems to be something preventing it from getting gas at hig rpm's?
|
|
08-25-2004, 01:45 PM | #3 | |
AF Newbie
Join Date: Apr 2004
Location: Chesapeake, Virginia
Posts: 38
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: husaberg fuel/carby problem
Perhaps low fuel flow, you may need to find the cause of it. Clogged area? I had/have the same problem with my KE 100 and the cause of it was reported to be a dirty floater pin, if you know what that is in, let me know, I just know where to find it on my bike.
__________________
Cars: 1995 Plymouth Neon SOHC 1995 Kawasaki KE100 Wanted: 1995-1999 Subaru Legacy GT sedan |
|
08-25-2004, 05:28 PM | #4 | |
AF Enthusiast
|
Re: husaberg fuel/carby problem
is there a good brether on the fuel tank. if you have a clogged breather it wont let enuf fuel go thru. just check the tank breather if. if its good the floats mabe a problem or cloged fuel filter
__________________
Sony cdx f5700 HU Need 4x6s for the front but for now i have tweaters out of a blow 6x9 5" blaupunk2 ways for mids fullrange box with 2 12s ans 2 tweets. they are shitty some sale yard stuff buts its ran off a boss 4 ch 400w 1 pioneer 12 immp 150 rms (its a peice of shit to but it gets the job done) in a sealed box with leaks its ran off a old school jensen 250 watts bridged |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|