Replacing Evap. canister Control Valve, Boost Sensor, and Knock Sensor?

[Johnwhizzy]

I just did my knock sensor today!! It took me a little more than an hour. After reading my comment you could do it quicker. Here's what you need. Light,a (good quality 3/8")universal swivel,12mm socket,12" 3/8" extension(to avoid knuckle busting!), magnet on a stick(for lack of a better term),long needle nose plyers for when your taking the knock sensor out, after first taking the screw out with the magnetstick thingy. The plyers help when repositioning the KS. Once u get the sensor back in the V of the engine put the screw back in to help guide the KS in its final place. Make sure to clean the ground screws.They are 10mm and easy to find. The guy with the link shows a great diagram of what your mission is!! GOOD LUCK!! Well now you don't need luck; just Do It!

[kawatee77]

Auto safety features will also lower your payments. Heading the list of money saving safety features is antilock brakes. Certain states ? such as Florida, New Jersey and New York ? encourage drivers to buy cars with antilock brakes by requiring insurers to give discounts. Check to see if you live in such a state, or if the insurance company you are considering gives a discount for this feature. Automatic seatbelts and airbags are also frequently rewarded with insurance discounts.

---------------------------------
Look for saving car insurance:
http://www.insurancebasis.com/auto_insurance.php