Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-23-2007, 07:29 PM | #1 | |
AF Newbie
Join Date: Jun 2007
Location: the NAVY, Mississippi
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
compression ratios and method of compression
For those of you who are not afraid to rip apart the block for more power, higher compression can help. On this note, i have a few questions.
1. What compression ratio's are you guys using? 2. How did you achieve said ratio(i.e. "stroker" crankshaft, longer connecting rods, custom pistoms, shorter cylinders, etc)? 3. In the Automotive Encyclopedia i have, it says that General Motors did several experiments many years ago and decided that in gasoline engines, the optimal compression ratio was 17:1. Have any of you actually gone this extreme? if so, how and what are the results? Thanks to all the people on here who have taught me so much, and will (hopefully) continue teaching me for years to come. |
|
03-24-2012, 10:50 PM | #2 | |
AF Newbie
Join Date: Mar 2012
Location: Murphy, North Carolina
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: compression ratios and method of compression
that's crazy. Highest compression ratio I've ever personally seen was 16:1 and that was a diesel.
|
|
05-28-2013, 06:26 PM | #3 | |
AF Newbie
Join Date: May 2013
Location: Bath, New York
Posts: 8
Thanks: 1
Thanked 0 Times in 0 Posts
|
Re: compression ratios and method of compression
The compression ratio's you speak off, would never be driveable on a day to day basis, nor affordable or reliable. As compression ratio goes up, so does the chance of detonation. Detonation is the enemy. High compression on a Subaru is a silly concept. The road as already been paved, low compression and boost. All motor Subaru's stop at around 200WHP, at these levels the investment would have been better spent.
|
|
|
POST REPLY TO THIS THREAD |
|
|