Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
'88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-25-2004, 10:36 PM | #1 | |
AF Enthusiast
|
Axle removal
ive been getting some wierd sounds upon acceleration in my SI. so i took it apart thinking it could be a wheel bearing but my CV boot is ripped and there is grease all over. wheel bearing seems to be fine. my question is how do i remove axle from tranny to replace? also, do i need to drain tranny fluid before removing axle from differental (stupid question i know)?
thnks
__________________
91 Hatch SI Heart of my Baby - DOHC ZC - Si tranny - PG7 Finally painted!!!
|
|
07-25-2004, 11:49 PM | #2 | |
AF Enthusiast
|
Re: Axle removal
no just pull all the long bolts to like the tire rod and stuff so the tire is free hanging and yank the axle or use a fork which is best...but memer first thing you gotta do is get a 32mm axle nut to remove it...just done this a month ago to remove engine from a busted rod bearing
|
|
07-26-2004, 05:08 AM | #3 | |
AF Newbie
Join Date: May 2004
Location: Mountain View, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Axle removal
make sure you drain the tran first ,or it'll be messy bro,remove the tire ,lower control are fork,castle nut 1-1/4 is what i use or 32mm . Use a big screw driver to pop the axel out of the tran and pull it out.
|
|
|
POST REPLY TO THIS THREAD |
|
|