Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
02-06-2008, 09:32 PM | #1 | |
AF Newbie
Join Date: Apr 2007
Location: Port Moody
Posts: 37
Thanks: 0
Thanked 0 Times in 0 Posts
|
"ABS" Light
I recently was issued a Motor Vehicle Inspection on My 1996 Dodge Ram. i replaced the ball joints, front axle shaft "U joints, and the rear pinion bearings. Now that everything is done i noticed when i release the Emergency Brake the indicator lights for the "ABS" and the Parking Brake light remain on. When i first release the E-brake these lights go out but then after driving a few min they come back on. Any Ideas where to start? Thanks!!
__________________
Steve |
|
02-07-2008, 02:37 AM | #2 | |
AF Regular
Join Date: Oct 2004
Location: Red Lion, Pennsylvania
Posts: 291
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: "ABS" Light
first thing to check is the rear sensor on top of your diff. maybe during the inspection the connection came loose. If its all connected good then I would prob replace the sensor all together (Mine went bad at about 60,000 Miles). It only costs $40-50 at a local dealer or local auto parts store.
__________________
|
|
|
POST REPLY TO THIS THREAD |
|
|