Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-11-2005, 11:44 PM | #1 | |
AF Newbie
Join Date: Feb 2004
Location: Vacaville, California
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
2001 Insight P1259 Trouble Code
While driving my car engine started to die and then the check engine light came on. Car started to drive fine, but when checked to see trouble codes, I had a P1259 VTEC code malfunction. I'm assuming P1259 is a VTEC code on the Insight. My freeze frame data is as follows.
Fuel Sys1: Open Loop Driving Calculated Load: 50% Coolant Temp: 197.6 deg F Short Term FT,B1:0.0% Long Term FT,B1: 0.0% Manifold Absolute Pressure: 14.8inHg Engine RPM: 4625RPM Speed: 53.1MPH Intake Air Temp: 116.6Deg F Throttle Position: 24.3% Any help will be appreciated. |
|
11-20-2005, 09:21 PM | #2 | |
AF - Advisor
Join Date: May 2003
Location: too damn far., California
Posts: 3,039
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2001 Insight P1259 Trouble Code
check for open and shorts between ecu and vtec switch. test the vtec solenoid and switches for voltage contiuty, resistance.
if you dont understand, a haynes from your local parts store will have the diagrams and explanations in them for you.
__________________
99 JRSC@9.5 psi si- I voted for the Terminator for Gov. 95 HB- B16a2- SC34@12psi WTB: USDM B16a2 or B16a3 complete short block. pm is the key. FS: B series InlinePro cast mani, PnH RC 550s, and Hondata S2b. pm me. |
|
12-03-2005, 03:10 PM | #3 | |
AF Enthusiast
Join Date: Apr 2003
Location: West Milford, New Jersey
Posts: 744
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2001 Insight P1259 Trouble Code
Check the oil make sure you have it in the engine.
__________________
Stop asking me about radio codes I cant get them anymore!!! |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|