Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
04-13-2013, 08:02 PM | #1 | |
AF Newbie
Join Date: Apr 2013
Location: las vegas, Nevada
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Buying a 1996 Saab 900S with bad clutch
I am buying a 1996 900s from a guy who says he thinks it has a bad throw out bearing. Going to fix the thing myself. I hear someone on here mention that adding a hydaulic master for the clutch is a great modification. I thought I'd get set up on the forum for when I have questions. I'm going to use the Haynes manual to lead me through the repairs. Anyone have any suggestions before I rip into this project? Thanks.
|
|
05-04-2013, 09:15 PM | #2 | |
AF Newbie
Join Date: Sep 2006
Location: Penticton
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Buying a 1996 Saab 900S with bad clutch
I have a Saab 1994 with the 2.3l. Engine, and I replaced the clutch and the trowout bearing myself and it was a major job. To make the job worth it, I also replaced the front and rear seals, one of the lower swing arm(the lower ball joint rubber boot was torn, the the balljoint itself was slighly loose already), I kept track of all the bolts on a big peice of cardboard and labeled all the bolts where they came from, and the size socket i need, and when possible, the torque spec.Its a major job, I will not trust anybody to do it for me. Too many things can go wrong in the assy. and some of it wont show-up till a few yeras to come.
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|