Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
11-26-2006, 07:30 PM | #1 | |
AF Newbie
Join Date: Nov 2006
Location: TRENTON, Michigan
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
Water Pump ! 3.3 I6
OK GUYS HOW THE HELL DO I GET THIS WATER PUMP OFF, I HAVE EVERYTHING TORE OFF, THEN I GET A SPOT WHERE WHERE THERE IS A STUD AND A NUT I GET THE NUT OFF HOW DOES THE STUD COME OFF. TO ME IT LOOKS LIKE THE BRACET FOR THE AC,ALT HAVE TO COME OFF BUT IT IS THE WHOLE TIMEING COVER I DONT WANT TO TAKE THAT OFF TO GET THE WATER PUMP OFF
HELP HELP 1981 200 CI 3.3 INLINE 6 SUCKS ! |
|
12-02-2006, 08:28 PM | #2 | |
AF Enthusiast
Join Date: Sep 2006
Location: Athens, Georgia
Posts: 4,662
Thanks: 0
Thanked 64 Times in 64 Posts
|
Re: Water Pump ! 3.3 I6
Normally the stud stays in as the pump will come off with the stud in place.
If you have to remove a stud use two nuts hold the top nut with a wrench and tighten the bottom nut against the top nut. When tight just use a wrench on the bottom nut and remove the stud. If the stud comes out they use a nut welded on and you remove it with a deep socket. The stud is for alignment purposes so leave it in place. Just feel with your fingers around the edge of the pump when ready tap it with a hammer and screwdriver and remove it. |
|
|
POST REPLY TO THIS THREAD |
|
|