Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
01-24-2010, 08:03 PM | #16 | |
In God We Trust
|
Re: 4l60e no 2nd gear
Pictures of the worn out parts are always nice! =p
Good luck!
__________________
-2000 Grand Prix GTP 170,000mi (daily driver) -2000 Olds Alero 100,000mi (soon to be DD with gas at $3.45/gal) -1997 Chev K1500 4x4 115,000mi (Natalie's truck [nans_grandprix]) AF "2.0" Community Guidelines Conservative Victory 2012!!! "I'll Keep my Guns, Freedom, and Money. You can Keep the Change!" ----->>>>> Did You Know? <<<<<----- |
|
01-25-2010, 05:25 PM | #17 | |
AF Newbie
Thread starter
Join Date: Nov 2009
Location: farmville, Virginia
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 4l60e no 2nd gear
I will post pictures soon. I also luckily ordered the Beast sunshell. The original sunshell was broken at the splines on the rear of it.
|
|
02-07-2010, 02:33 PM | #18 | |
AF Newbie
Thread starter
Join Date: Nov 2009
Location: farmville, Virginia
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 4l60e no 2nd gear
Truck is all back together now. The broken parts were the 2-4 band, the reverse input drum, forward piston cracked and the sunshell splines broken. I just took out for a test drive. It hesitates just a bit from 4th to 3rd downshift. I am keeping a check on the fluid and will post any other updates or problems. Thanks for all the advice.
|
|
02-17-2010, 05:55 AM | #19 | |
AF Newbie
Thread starter
Join Date: Nov 2009
Location: farmville, Virginia
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 4l60e no 2nd gear
Well I had made a mistake in the valve body. I ended up burning up the 3-4 clutches. I replaced them with the zpac clutch pack and now have the truck back together. Everything is great. This has been a great learning experience. I think now I could probably do the job in about 2 1/2 days. Thanks for all the tips. It's nice to know how much money I saved by doing this myself.
|
|
02-22-2010, 01:59 PM | #20 |
AF Newbie
Thread starter
Join Date: Nov 2009
Location: farmville, Virginia
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 4l60e no 2nd gear
|
07-27-2017, 05:18 PM | #21 | |
AF Newbie
Join Date: Jul 2017
Location: Colorado springs, Colorado
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 4l60e no 2nd gear
I have the same issue '00 GM Jimmy, 4l60e, and no second gear, shifts to third when let off gas in first, second acts like neutral it will shift into it when shifting down and there's just nothing there, I was hoping just a solenoid, but dudes story a above scares me lol. Every other gear works great absolutely no slipping. Been driving like this for four year 160 miles a day and no other issues have occurred.... opinions please I'd be very grateful to ur time. Hopefully post not too late...
|
|
07-28-2017, 04:42 AM | #22 | |
AF Newbie
Thread starter
Join Date: Nov 2009
Location: farmville, Virginia
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 4l60e no 2nd gear
Hopefully yours is just a solenoid or the 2-4 servo. Either of those is pretty easy fix. Mine is still going strong with over 100k on rebuild.
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|