Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
11-27-2016, 07:12 PM | #1 | |
AF Newbie
Join Date: Nov 2016
Location: Tulsa, Oklahoma
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
95 grand am se pcm fuse keeps. Blowing
Engine starts and runs no problem when I drive a few miles the fuse blows it's done it before and I found the oil pan sensor had came loose and was touching the frame I was fine for a few months I just replaced the fuel pump put new connector checked wireing all good I looked u red the hood the best I know how does anyone have any ideas
|
|
11-28-2016, 09:22 PM | #2 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: 95 grand am se pcm fuse keeps. Blowing
well, you need a schematic to see what that fuse feeds, could be more than one circuit.....
tracing the circuit to try and find a short could be laborious......alternative is to cut that fused circuit to the pcm, and run a new fuse protected power line to the pcm..... |
|
11-28-2016, 10:08 PM | #3 | |
out saving the world
Join Date: Jul 2005
Location: Yourtown, Indiana
Posts: 10,707
Thanks: 8
Thanked 18 Times in 18 Posts
|
Re: 95 grand am se pcm fuse keeps. Blowing
Welcome to AF Jbagwell8974
I would start with any prior areas of the wiring that has been, or looks like its been, hacked on. Not exactly sure what all is on that circuit so you're gonna need a wire diagram. Their are a few we have here you'll have to look through it for your year and PCM diagrams. if that fails.... you can make a account on autozone and usually find a free diagram. hope that helps
__________________
1999 Grand Am SS 3.4 OHV |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|