Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
04-04-2005, 08:47 AM | #1 | |
AF Newbie
Join Date: Apr 2005
Location: Springfield, Missouri
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Clear Coat Adhesion
I have just sprayed PPG base and DCU 2021 clear on my car. I have sanded the clear with 1200 sandpaper. I need to spray black hood and rear deck stripes over the clear then add 2 more coats of clear over everything. My question is do I need to use an adhesion promoter or is sanding with 1200 grit paper good enough?
|
|
04-04-2005, 11:40 AM | #2 | |
Captain Over Engineer
|
Re: Clear Coat Adhesion
You should have used and interclear. I've never done it like that myself, but I've seen it done before with no problems.
__________________
-Mike AF Director of Media / Photographer mike.lawrence@automotiveforums.com | AutomotiveForums.com | Flickr Gallery |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|