 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
01-10-2008, 07:02 PM
|
#1 | |
|
AF Enthusiast
Join Date: Jan 2008
Location: Virginia Beach, Virginia
Posts: 1,396
Thanks: 71
Thanked 63 Times in 58 Posts
|
Educate me on re-packable bearings... what are these "caps" on the ends?
Driver's side says, "Made in Thailand" and has a small hole in the center. I can spin it with my hand but it's not threaded. I can see a little rubber/grease around the edge. Is this normal?
 Passenger side says "Made in Chine" has no hole in the center and I cannot move it with my hand.  Thanks, Brian
__________________
Brian B. Panoz GTRA - LS1 swap in progress #4 Z06 - NASA ST3/TT3 |
|
|
|
|
01-10-2008, 07:37 PM
|
#2 | |
|
AF Newbie
 Join Date: Dec 2007
Location: North Canton, Ohio
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Educate me on re-packable bearings... what are these "caps" on the ends?
i usualy use a mallet and or a flat head screw driver. pull the cap off then take the nut off and the roter will come off with the bearing inside pack it put it back together and your done i wish they werer all still that easy lol. RPM
__________________
RPM |
|
|
|
|
|
01-10-2008, 07:40 PM
|
#3 | |
|
AF Newbie
Join Date: Dec 2007
Location: North Canton, Ohio
Posts: 24
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Educate me on re-packable bearings... what are these "caps" on the ends?
O and im sory those are the dust caps for technical terms. RPM
__________________
RPM |
|
|
|
|
|
01-10-2008, 10:30 PM
|
#4 | |
|
AF Enthusiast
Thread starter
Join Date: Jan 2008
Location: Virginia Beach, Virginia
Posts: 1,396
Thanks: 71
Thanked 63 Times in 58 Posts
|
Re: Educate me on re-packable bearings... what are these "caps" on the ends?
^ Thanks... they were all repacked in August when Penske added the car to their promotional fleet and painted it so I'm good for a bit. The cars were driven 2 months max and then returned to Panoz.
__________________
Brian B. Panoz GTRA - LS1 swap in progress #4 Z06 - NASA ST3/TT3 |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
