Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-04-2004, 07:57 PM | #1 | |
AF Newbie
Join Date: Feb 2004
Location: peterborough
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Eagle premier extended crank
I have just aquired an eagle premier I got it through safety but it takes forever to start.I roll it over for quite a while then it starts.I thought it was the fuel pump so I put a pump + filter on it new.then someone said it was the pickup so I put it and a new module on.the car runs fine once running except for a minor hesitation when you really stab the throttle.I tried computer,TPS,fuel pressure regulator,the new patch harness from chrysler for the pickup,The dist was full of oil so I replaced the cam seal + changed the cap + rotor.It has 120 PSI compression on every cylinder,+ like I said the car runs good.has anyone run into this.
|
|
02-19-2004, 10:02 PM | #2 | |
AF Enthusiast
Join Date: Dec 2003
Location: Pittsburgh, Pennsylvania
Posts: 512
Thanks: 3
Thanked 2 Times in 2 Posts
|
Re: Eagle premier extended crank
Have you checked to see if there is spark when you first turn the key and does this have a cold start injector?
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|