Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Car Modeling Share your passion for car modeling here! Includes sub-forum for "in progress" and "completed" vehicles. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
06-06-2003, 03:17 AM | #1 | |
AF Enthusiast
Join Date: Nov 2002
Location: London
Posts: 1,402
Thanks: 0
Thanked 7 Times in 6 Posts
|
TIP: removal of tyre mold lines
No matter how good the manufacturer (i.e Tamiya) there is always going to be the central mold seam on the tyres. Road tyres are the worst when what with all the tread to consider when trying to remove the seam.
I've tried a fresh scalpel blade, but I found that I could never get a clean enough cut, there is a threat of slipping and taking away a few blocks of tread and it usually takes ages. I've tried sanding, but this is not that easy either as the seam is thin and flimsy and you end up taking more rubber off than required. You also don't cleanly remove it either. Well, here's a solution I stumbled accross last night when working on the Aoshima Exclusive Matrasse wheel set. The 'tool' I used was a nail clipper. It was perfect! As the cutting edge is curved for your fingernail, it was ideal to clip around the circumference of the tyre. You can get in very close, as the rubber is fairly self healing. I managed to cleanly remove the seams off four tyres in a matter of a couple of minutes. Hope this of help to you. |
|
06-06-2003, 03:24 AM | #2 | |
"P-Man"
|
Nice tip...never thought about using them before
__________________
Current Build.....1/12 Scale Camaro......Almost finished!!! View All My Models Here. |
|
06-06-2003, 03:27 AM | #3 | |
H4X0R T0 T3H M4X0R
|
great tip i have been using it for ages just never thought to post it the clippers also work well for trimming the plastic away from pieces and for cutting off of the trees. my gf showed me when she was building a gundam
-GTi-VR6_A3
__________________
-GTi-VR6_A3 |
|
06-06-2003, 03:39 AM | #4 | |
AF Enthusiast
Join Date: Mar 2003
Posts: 305
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hmmm. Interesting. I'll try that. :flash:
|
|
06-06-2003, 04:47 AM | #5 | |
AF Regular
Join Date: Oct 2002
Location: Turku (Finland)
Posts: 342
Thanks: 0
Thanked 6 Times in 6 Posts
|
I've given the mold seam a coat of superglue to harden the rubber. After that it's very easy to sand off. I think this method works better on slicks (I usually coat the whole thread surface and then sand it to give it a used look) but it isn't impossible to use on normal tyres either.
-Mikko |
|
06-06-2003, 05:21 AM | #6 | ||
AF Enthusiast
Thread starter
Join Date: Nov 2002
Location: London
Posts: 1,402
Thanks: 0
Thanked 7 Times in 6 Posts
|
Quote:
Would this not leave white residue all over the tyre? |
||
06-06-2003, 08:44 AM | #7 | |
AF Enthusiast
Join Date: Mar 2003
Location: Taipei
Posts: 709
Thanks: 0
Thanked 0 Times in 0 Posts
|
Great tip! Thanks for sharing.
You should have posted this tip 24hrs earlier. I already spent ages trying to remove mold lines on 8 tires. 12 more to go... |
|
06-06-2003, 08:52 AM | #8 | ||
AF Enthusiast
Thread starter
Join Date: Nov 2002
Location: London
Posts: 1,402
Thanks: 0
Thanked 7 Times in 6 Posts
|
Quote:
|
||
06-06-2003, 09:10 AM | #9 | |
AF Enthusiast
Join Date: Apr 2003
Posts: 262
Thanks: 0
Thanked 0 Times in 0 Posts
|
How do you guys remove the mold lines from the inside of the wheel?
__________________
|
|
06-06-2003, 09:39 AM | #10 | ||
AF Enthusiast
Thread starter
Join Date: Nov 2002
Location: London
Posts: 1,402
Thanks: 0
Thanked 7 Times in 6 Posts
|
Quote:
I haven't tried it, but I suppose you can turn the tyre inside out and adapt the method(s) above. |
||
06-06-2003, 10:09 AM | #11 | |
AF Newbie
Join Date: May 2003
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
another thing that works well is cuticle scisors the cutting blades are only about 3-4 cm long, they are usually very sharp and they come in both straight and curved blade variety. I get mine from where my wife gets her beauty stuff.
|
|
06-06-2003, 10:54 AM | #12 | |
AF Regular
Join Date: Apr 2003
Location: aurora
Posts: 384
Thanks: 0
Thanked 0 Times in 0 Posts
|
Cool never thought of nail clippers before!
__________________
"If you feel in control. You're not going fast enough" - Mario Andretti |
|
06-06-2003, 11:52 AM | #13 | |
AF Enthusiast
Join Date: Apr 2003
Posts: 262
Thanks: 0
Thanked 0 Times in 0 Posts
|
No dude you misunderstood. I said the wheels not the tyres. I bought some Fujimi Model 5's and the mold lines are shocking and because they are long spokes you can see the mold lines really badly through the wheel.
__________________
|
|
06-06-2003, 12:30 PM | #14 | |
AF Regular
Join Date: Feb 2002
Posts: 132
Thanks: 0
Thanked 0 Times in 0 Posts
|
Thanks for the tip, realy saves alot of time and sandingpaper:flash:
|
|
06-07-2003, 01:03 AM | #15 | |
Getting Old...
Join Date: May 2003
Location: Lugano, Switzerland
Posts: 753
Thanks: 0
Thanked 0 Times in 0 Posts
|
I had a poor set of wheels with a bad seam that was hard to get rid of. I actually used little bit of lacquer thinner on a q-tip and rubbed it lightly over the seam. Be very careful if you try this because the lacquer thinner basically 'melts' the rubber. If you're careful, you can melt the seam away and a light 'scuff' with sandpaper seems to finish everything off.
Murray |
|
|
POST REPLY TO THIS THREAD |
|
|