Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-09-2009, 12:42 PM | #1 | |
AF Newbie
Join Date: Jun 2005
Location: Clinton Twp, Michigan
Posts: 91
Thanks: 1
Thanked 2 Times in 2 Posts
|
84 Sunbird Front Swaybar Removal
ok, the manual makes this look pretty easy...
Car on jackstands, remove end links (including 24 year old original that takes 3 hours and a torch). Loosen and remove front sway bar to body bolts and slide bar out driver side after removing wheel. There is no way that will work as I described it. There is not enough room once you remove the sway bar-body nuts for the U bolts to come free from around the bushings. Any ideas here? This has to have been discussed before. I want to get the bar refinished and put some nice energy sustension bushings on there. Advice Appreciated. |
|
07-24-2010, 10:24 PM | #2 | |
AF Newbie
Thread starter
Join Date: Jun 2005
Location: Clinton Twp, Michigan
Posts: 91
Thanks: 1
Thanked 2 Times in 2 Posts
|
Re: 84 Sunbird Front Swaybar Removal
Got this done, not bad...
|
|
|
POST REPLY TO THIS THREAD |
Tags |
bar , sunbird , sway |
|
|