Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-26-2017, 01:17 AM | #1 | |
AF Newbie
Join Date: Jan 2012
Location: Quad Cities, Iowa
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
|
Cruise Control Help
the cruise control in my 2000 Ford Windstar 3.8L doesn't work.
Brake lights turn on and off (so switch must work) Speedometer works (so speed sensor must work) horn works (so at least some clock springs work) Fuses good (as verified by servo connector test) servo 10 pin connector:
is the voltage range between 5 and 6 normal? Is there any way to test the servo? My gage cluster doesn't have a speed control indicator...so please do not suggest I run the cruise self test and count blinks. Also, since my off button doesn't seem to work, I couldn't do it anyway.
__________________
2000 Chevrolet Corvette Fixed Hardtop, 539 rwhp 2005 Saturn Ion Redline, 246 fwhp 2002 Audi A6 Avant 2000 Chrysler Sebring LXi |
|
05-26-2017, 01:11 PM | #2 | |
AF Newbie
Thread starter
Join Date: Jan 2012
Location: Quad Cities, Iowa
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Cruise Control Help
servo was defective. replaced with salvage yard servo for $21 and it works now.
__________________
2000 Chevrolet Corvette Fixed Hardtop, 539 rwhp 2005 Saturn Ion Redline, 246 fwhp 2002 Audi A6 Avant 2000 Chrysler Sebring LXi |
|
|
POST REPLY TO THIS THREAD |
|
|