Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-10-2009, 02:10 AM | #1 | |
AF Regular
|
01 clk brake job tool requirements
Anyone know the tools required to replace the pads and rotors on a 01 clk 320 I have limited tools and need to know what I need to do the job without running to the parts store a million times
Thanks! |
|
01-12-2009, 04:54 PM | #2 | |
AF Regular
Join Date: Dec 2008
Location: white bear lake, Minnesota
Posts: 114
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 01 clk brake job tool requirements
The calipers slides are metric 7mm allens if i remember correctly ( I could be wrong) and the bolt that holds the rotor on is a 4 or 5mm allen. The bolts for the caliper bracket are 16mm bolts?? Just get some metric sockets and allens, that will cover it.
|
|
01-25-2009, 11:28 AM | #3 | |
AF Regular
Thread starter
|
Re: 01 clk brake job tool requirements
Thanks For The Reply Do You Know If You Need To Reinstall The Sensors Or Can You Just Disconnect Them With No Error?
|
|
01-27-2009, 04:32 PM | #4 | |
AF Regular
Join Date: Dec 2008
Location: white bear lake, Minnesota
Posts: 114
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 01 clk brake job tool requirements
You can leave them off and not have any problems but why. I would recommend reusing the old ones or installing new. It would be a bad deal if you went through another set of pads and started to grind in the rotor before noticing the problem.
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|