Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-29-2012, 01:02 PM | #1 | |
AF Newbie
Join Date: Apr 2010
Location: Calgary
Posts: 8
Thanks: 1
Thanked 0 Times in 0 Posts
|
94 GMC EGR problems
My 1994 GMC 1500 truck didn't start after going out for a short run last night. I hooked up the code reader and it said (32) EGR system (Vacuum switch shorted to ground on start up or, Switch not closed after the PCM has commanded EGR for a specified period of time or EGR solenoid circuit open for a specified period of time. I replaced the EGR control solenoid (6) months ago and a few other faulty sensors. I took the EGR electrical connector off and plugged it into a lead on the same harness I would guess is a bypass and the truck started and runs no problem but the code remains. any thoughts? is the EGR valve itself faulty or is it the control solenoid or could I just leave the bypass hooked up?
|
|
12-15-2014, 03:19 PM | #2 | |
AF Newbie
Join Date: Nov 2004
Location: Galesburg, Illinois
Posts: 54
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: 94 GMC EGR problems
to clear the codes on a 94, or any of the OBD1 systems, you have to remove the battery cables for a few seconds the reconnect the battery to clear the codes.
i have a 94 with a 350 also and have been getting the EGR code for a long time. mine happens when i get up to highway speed. i just ignore it. mine has over 300,000 miles on it. |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|