 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
11-02-2010, 11:41 AM
|
#1 | |
|
AF Newbie
Join Date: Nov 2010
Location: ypsilanti, Michigan
Posts: 10
Thanks: 0
Thanked 1 Time in 1 Post
|
Reverse gear out!!
I have a 96monte carlo ls 3.1 and the trans was slippina few times and I added Lucas transfix to it. Now it just stopped going in reverse but all the other gears work. I was thinking about a trans flush and ew filter but Im not sure if that will solve it. Im trying to see if i can fix it withut a rebuild because if i have to rebuild the tranny il jts have to scrap it.
|
|
|
|
|
11-02-2010, 02:32 PM
|
#2 | |
|
A990 racer
 Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,950
Thanks: 25
Thanked 371 Times in 365 Posts
|
Re: Reverse gear out!!
No reverse is internal failure, no way to fix this without a major repair.
__________________
|
|
|
|
|
|
11-04-2010, 12:31 AM
|
#3 | |
|
Registered Offender
Join Date: Mar 2006
Location: Rural
Posts: 6,517
Thanks: 6
Thanked 341 Times in 336 Posts
|
Re: Reverse gear out!!
The one possibility is to check the reverse servo from the outside. The servo cover can be removed and the servo piston and seals can be removed and inspected.
 It may also be possible to verify that the reverse band is holding the input drum or if the band or anchor are damaged. A line pressure test and scan should reveal whether the reverse solenoid is operating, and that the valves are complying. You'll have to determine if the vehicle is worth the diagnostic time.
__________________
Permanent seat assignment on the Group W bench... Automotive Forums Survival Guide |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
| Tags |
| problem , reverse , trans , transmission |
 |
| Thread Tools | |
|
|
