 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-04-2014, 07:55 PM
|
#1 | |
|
AF Regular
Join Date: Mar 2008
Location: Flushing, Michigan
Posts: 101
Thanks: 16
Thanked 0 Times in 0 Posts
|
2006 4x4 Sierra front hub bearings
I recently changed front bearings on my 2006 Sierra. I changed both sides. The other day on the way home from work I noticed a slight vibration coming from front end around 60mph. It didn't last very long and went away. Today on the way home from work I took the eway and the vibration was present around 70mph and stayed there. It's more in the the floor boards than in the steering wheel. I replaced both front bearings with timken bearings. When I got home today I jacked the truck up to check everything under front end. Everything checks out. One thing I did notice is the drivers side hub had a little grease oozing out of it. The passenger side didn't have any. Is that normal? I torqued everything with a torque wrench to specs. I haven't rotated tires to see if that would take care of vibration yet.
Last edited by Kelsey92504; 06-04-2014 at 07:56 PM. Reason: More information |
|
|
|
|
03-06-2020, 07:51 PM
|
#2 | |
|
AF Newbie
Join Date: Oct 2006
Location: horse cave, ky, Kentucky
Posts: 37
Thanks: 5
Thanked 0 Times in 0 Posts
|
Re: 2006 4x4 Sierra front hub bearings
Did you buy quality bearing assemblies or cheap chinese ones
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
